With the aft stateroom starboard fascia board fitted, next I got the port side done.
Pretty mahogany board, resawn, jointed, and ready to become a fascia
Nasty original facia will make a nice pattern
The old fascia is ~1/4″ shy of fitting up to the new wall on the bottom
In the pic above, I’m holding a piece of the Whisper Wall perimeter track up to show how it’ll eventually be installed.
Need to add some material to fill gaps in a few spots
This board is going to look great once it’s varnished
Truing the lower edge
Rounding the lower edge
I traced the pattern and got ready to cut
Just like that!
Another fascia board done
Next up in our 1969 Chris Craft Roamer 46 Refit: Making the Aft Stateroom Center Fascia Board
1969chriscraftroamer46 