1969 Chris Craft Roamer 46 Refit: Prepping the Aft Head for Paint

The aft head ceiling panels are installed, so the next step involves sanding everything down, final fairing, and priming.

After sanding the fillets, we sprayed Awlquik

After sanding the fillets, we sprayed Awlquik

Fillets look good!

Rattle can black guide coat helps make the fillets uniform

Rattle can black guide coat helps make the fillets uniform

Next, we sprayed Awlgrip 545 primer

Next, we sprayed Awlgrip 545 primer

Fillets look better at each step!

Fillets look better at each step!

Ready for final sanding

We’ll let the 545 cure overnight, then hit it with 320 grit before taping everything off and spraying the eggshell Awlgrip shiny.

Next up in our 1969 Chris Craft Roamer 46 Refit: Spraying “the Shiny” in the Aft Head

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s